Limited only by where you draw the line.
General & Technical Data
Features
- Horizontal and vertical designs available
- Concealed clips and fasteners provide a sleek exterior appearance with proven long-term performance
- Optional reveals of varying widths
- Factory foamed for dependable thermal performance
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Advanced Fluorofinish PVDF, metallic, and mica color coating systems are available in over 70 standard colors
- Optional Duracast textured finish in eight standard earthtones
Panel Description
Metal
- Standard - 22/26 gage [0.76mm / 0.48mm], 22/22 gage [0.76mm / 0.76mm]
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional aluminum face available, consult CENTRIA
Surface Finish
- Exterior - Non-directional embossed - Smooth Flat
- Interior (liner) - Directional embossed planked or flat - Smooth planked
Joinery (with concealed fasteners)
- Vertical - Double tongue-and-groove, 1/8" nom. [3mm] joint-standard
- Horizontal - Rainscreen, vented, pressure-equalized and drainable joinery, 1/2" nominal [13mm] joint - standard
- Segmented joint - 5/8" x 3/4" [16mm x 19mm] deep recess with factory applied black gasket, standard
- Max. segments per panel - 12
- Min. length of segment - 1' [3.3m]
Panel Width
- Standard - 24", 30", 36" [610mm, 762mm, 914mm]
- Custom - 10" to 40" [254mm to 1016mm]
Panel Length
Panel Thickness
- 2" - standard [51mm]
- 3" - consult CENTRIA [76mm]
"R" Value (at full thickness)
- 2" panel with 1/2" reveal - R14 [51mm – Depth U=0.41 W/m2K]
- 3" panel with 1/2" reveal - R21 [76mm – Depth U=0.27 W/m2K]
R-Values are based on ASTM C236 and C518 testing. Air films are included.