CENTRIA ADP 100C Architectural Design Panels are designed for use on curved portions of roof, and may be combined with ADP 100 Panels on straight roof areas. ADP 100C Panels have a standard batten seam design and are secured with concealed clips. They are ideal for mansards and fascia applications. Features include:
- 1" [25mm] nominal batten height
- 12" [305mm], 16" [406mm] and 18" [457mm] widths available
- 24' [7.3m] -0" standard length; Longer lengths available
- Standard flat pan* (Not available striated)
- Snap-on battens
- Standard 24 [.60mm] gage Galvalume®** and G90 Galvanized
- Clip attachment
- Non-mechanically seamed
- Minimum slope 3:12 [25%]
*Oil canning within mill tolerance is not a cause for rejection. 18" [457mm] wide panels must be striated.
**Galvalume is a registered trademark of BIEC International, Inc.