CENTRIA ADP 100 Architectural Design Panels provide an economical and attractive solution to a wide range of non-structural standing seam roof applications. ADP 100 Panels offer a thin seam design with concealed fastener clips that make them ideal for mansards and fascia. Features include:
- 1" [25mm] nominal batten height
- 12" [305mm], 16" [406mm] and 18" [457mm] widths available
- 32' [9.8m]-0" standard length; Longer lengths available
- Standard striated pan; Optional flat pan*
- Snap-on battens reduce installation time and cost
- Standard 24 [.60mm] gage Galvalume®**; Optional substrates and gages available
- Clip attachment
- Non-mechanically seamed
- Minimum slope 3:12 [25%]
- Factory sealant applied in batten
*Oil canning within mill tolerance is not a cause for rejection. 18" [457mm] wide panels must be striated.
**Galvalume is a registered trademark of BIEC International, Inc.